Solid quality Plug and Play LED turn signals from 12oclock Labs

wookinpanub

New member
I recently purchased and installed the LED turn signals for the front from 12Oclock labs. Very impressed, short summary:

  • Easy Plug and Play
  • Bright
  • Small Profile
  • Solid build quality
  • Great support
  • Made in the USA
  • Daytime running lights integrated
  • Easily programmable for type of frequency of flashing
All items needed (all sold from 12oclock Labs)

  • Programmable Advanced Animated Turn Signals (choose lens color) - Specify the T7 to get the correct plug and play adapters to fit the stock female plugs on the bike
  • Fixed Rate Turn Signal Flasher
  • Turn Signal Mount Adapters (Yamaha oval adapters, choose plastic or metal)
Process for installation

  • Remove the front panel(s)
  • Remove existing signals
  • Mount new signals to the panel(s)
  • Install the wiring loom male adapter(s) and reinstall the panel(s)
  • Check all signals work (rear will flash fast)
  • Install the 'Fixed Rate Turn Signal Flasher' (under the main seat, right side). Do *not* install this first, it can blow the unit
  • Program the turn signals (if something besides the default is desired)
  • Retest all signals (Bike off: Turn signals, hazard lights and Bike on: Turn signals, hazard lights)
Side Notes

  • I chose not to do the rears yet, as 12oclock Labs is currently designing a 'Tail Eliminator' for the T7 that will have integrated rear signals (rough expected timeframe spring of 2022).
 

WilliampervE

New member
Chances are it’s the hazard warning switch. Carefully remove it and give it a spray with WD40 CONTACT CLEANER not the normal WD 40 work it a few times and chances are it will work.
 

Have a Great Day!

Top