wookinpanub
New member
I recently purchased and installed the LED turn signals for the front from 12Oclock labs. Very impressed, short summary:
- Easy Plug and Play
- Bright
- Small Profile
- Solid build quality
- Great support
- Made in the USA
- Daytime running lights integrated
- Easily programmable for type of frequency of flashing
- Programmable Advanced Animated Turn Signals (choose lens color) - Specify the T7 to get the correct plug and play adapters to fit the stock female plugs on the bike
- Fixed Rate Turn Signal Flasher
- Turn Signal Mount Adapters (Yamaha oval adapters, choose plastic or metal)
- Remove the front panel(s)
- Remove existing signals
- Mount new signals to the panel(s)
- Install the wiring loom male adapter(s) and reinstall the panel(s)
- Check all signals work (rear will flash fast)
- Install the 'Fixed Rate Turn Signal Flasher' (under the main seat, right side). Do *not* install this first, it can blow the unit
- Program the turn signals (if something besides the default is desired)
- Retest all signals (Bike off: Turn signals, hazard lights and Bike on: Turn signals, hazard lights)
- I chose not to do the rears yet, as 12oclock Labs is currently designing a 'Tail Eliminator' for the T7 that will have integrated rear signals (rough expected timeframe spring of 2022).